Install OpenSSL with IBIHOP


The installation instructions for OpenSSL with IBIHOP are as following:

  1. Download the latest version of source code from our website, and unzip it into your preferred location.
  2. To configure, go to the file location and please use the following command.
    $ make
  3. Before install the OpenSSL, remove the OpenSSL installed previously.
    $ sudo apt-get remove openssl
  4. To install the OpenSSL with IBIHOP, simply please use the following command.
    $ sudo make install
  5. To verify the installation you can use the following commands.
    $ openssl version -v
    OpenSSL 1.0.2o-dev  xx XXX xxxx
    
    $ ldd /usr/local/bin/openssl
            linux-vdso.so.1 (0x7ed9b000)
            /usr/lib/arm-linux-gnueabihf/libarmmem.so (0x76f54000)
            libssl.so.1.0.0 => /usr/local/lib/libssl.so.1.0.0 (0x76eec000)
            libcrypto.so.1.0.0 => /usr/local/lib/libcrypto.so.1.0.0 (0x76d60000)
            libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0x76d4d000)
            libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0x76c0e000)
            /lib/ld-linux-armhf.so.3 (0x76f6a000)